OSD MENU

NETWORK SETUP

 

 

 

 

IP MODE

 

STATIC

 

 

 

NW ENABLE

 

1

2

3

4

VIDEO PORT

80

 

 

 

UPGARDE PORT

5005

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

USB BAKCUP

TIME SET

 

START TIME

:

2006 / 05 / 04

10 : 00 : 01

 

END TIME

:

2006 / 05 / 05

13 : 08 : 13

 

BACKUP CHANNEL

1

2

3

4

 

BACKUP SIZE

 

 

73GB

 

89MB

 

 

BACKUP EXECUTE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Description

values and press

 

or

to confirm.

 

 

VIDEO PORT:

A port for the remote connection. Any port can be assigned as a video port, except the ports already used by the network services. The default video port is 80.

Use

and

buttons to go up and down and

select VIDEO PORT, and then press

 

or

and

 

 

to

move to

the selection. Use

 

and

buttons to change the selections values and press

or

to confirm.

UPGRADE PORT:

A port for the remote update DVR system firmware. Any port can be assigned as an upgrade port, except the ports are already used by the network services. The default upgrade port is 5005. For Upgrading DVR firmware, please contact your local dealer.

i

Please DO NOT cut off the power of the

DVR system while the firmware is

 

upgrading. Power failure will cause the

 

permanent damage of the DVR system.

 

 

Use

and buttons to go up and down and

select UPGRADE PORT, and then press

 

or

 

 

and

to move to the selection. Use

 

and

buttons to change the selections values and press

or

to confirm.

USB BACKUP:

Using USB device (ex. Pen drive or External Hard disk) to backup partial recorded video and playback on PC.

Use

and

buttons to go up and down and

select USB BACKUP, and then press

 

or

.

 

 

Use

and

to move left and right. And, use

and buttons to change the value and

press

 

or

to confirm.

 

 

1.Select the START TIME and END TIME.

2.Select the channels which user wants to backup.

3.The DVR system will display the system hard disk space and backup file size.

23