Avocent CPS1610, CPS810 Installation and Configuration, Hardware Overview

5

CHAPTER	Installation and Configuration
2

Hardware Overview

Figure 2.1 shows the front panel of a 16-port CPS network appliance.

Figure 2.1: 16-port CPS Appliance Front Panel

The lower left area of the front panel contains five LEDs and two buttons, which are described in Table 2.1.

Table 2.1: LEDs and Buttons

LED/Button	Description
POWER	The POWER LED illuminates when the CPS appliance is connected to a power source.
ONLINE	The ONLINE LED illuminates steadily (not blinking) when the CPS self-test and initialization
	procedures complete successfully.
LINK	The LINK LED illuminates when the CPS appliance establishes a connection to the network.
TRAFFIC	The TRAFFIC LED blinks when there is network traffic.
100MBps	The 100MBps LED illuminates when the CPS appliance is connected to a 100 MBps LAN.
RESET	The RESET button, when pressed, reboots the CPS appliance.
INIT	The INIT button, when pressed and held, restores the CPS appliance to factory defaults; for
	more information, see Reinitializing the CPS Network Appliance on page 10.