Chapter 5: CPS Appliance Commands

71

 

 

Table 5.37: User Add Command

Parameter

Description

 

 

 

<username>

3-16 alphanumeric character username. Usernames are case sensitive.

 

 

PASSWORD=<pwd>

3-16 alphanumeric character password. Passwords are case sensitive.

 

 

 

Name of uuencoded public key file on an FTP server. The maximum file size that

SSHKEY=<keyfile>

may be received is 4K bytes. If this parameter is specified, you must also specify the

 

FTPIP parameter.

 

 

 

FTPIP=<ftpadd>

FTP server’s IP address. If this parameter is specified, you must also specify the

SSHKEY parameter.

 

 

 

 

 

 

KEY=<sshkey>

Uuencoded SSH key.

 

 

 

 

Command and port access rights or level. You may specify multiple access rights,

 

separated by commas, or a level. Valid values for access rights are:

 

P<n>

Access to the specified port number.

 

P<x-y>

Access to the specified range of ports.

 

PALL

Access to all ports.

 

USER

User configuration access rights.

 

PCON

Port configuration access rights.

ACCESS=<access>

SCON

Configuration access rights.

 

SMON

Monitor access rights.

 

BREAK

Can issue Port Break command.

 

Valid values for access levels are:

 

ADMIN

PALL, USER, SMON, PCON and BREAK access rights.

 

APPLIANCEADMIN

PALL, USER, SCON, SMON, PCON and BREAK

 

Default = PALL,SMON

access rights.

 

 

PREEMPT=1234

Preemption level, in the range 1(lowest) - 4 (highest).

Default = 4 (highest)

 

 

 

Examples

The following command adds the username JohnDoe, with the password secretname, access to ports 2, 5, 6 and 7 and user and monitor access rights.

> user add JohnDoe password=secretname access=P2,5-7,user,smon

The following command adds the username JaneDoe, with access to all ports. The name of the SSH public user key file is cps_key2.pub. This file is located on the FTP server at IP address 10.0.0.3.

> user add JaneDoe ssh=cps_key2.pub ftp=10.0.0.3 access=pall

The following command adds the username JDoe and gives that user the Appliance Administrator access level, which enables access to all ports and CPS appliance commands.

> user add JDoe access=applianceadmin