38CPS Installer/User Guide

>POR 2 SET BAUD=576 FLOW=XON

---

ERR 27 - SET keyword value invalid

In the following example, there are spaces between BAUD, the equal sign and the value 57600. Spaces are not permitted between keyword parameters and their values.

>POR 2 SET BAUD = 57600 FLOW=XON

------------

ERR 26 - SET keyword parameter invalid

Syntax conventions

This manual uses the following command syntax conventions:

Brackets [ ] surround optional keywords and values.

Angle brackets < > surround user-supplied positional parameters and keyword parameter values.

In most cases, choices are separated by a vertical bar . The description indicates if you may specify more than one of the choices and how to separate multiple values. The exception is the Server SSH command. In this case, the vertical bar is specified on the command line when you wish to enable the “password or key” method (PWKEY) or the “key or password”

method (KEYPW).

Command Summary

Table 4.4 lists the CPS appliance commands, including a brief description plus the required access rights and level.

Table 4.4: CPS Appliance Command Summary

Command

Description, Access Right and Access Level

Accesses devices from the serial CLI port. Access right: port-specific

ConnectAccess level: ADMIN or APPLIANCEADMIN (Users who do not have the ADMIN or APPLIANCEADMIN level must have the appropriate port access configured to issue this command.)

Ends a device session initiated with Connect command. Access right: port-specific

DisconnectAccess level: ADMIN or APPLIANCEADMIN (Users who do not have the ADMIN or APPLIANCEADMIN level must have the appropriate port access configured to issue this command.)

Displays information about commands.

HelpAccess right: none needed

Access level: all

Adds a port alert string.

Port Alert Add Access right: SCON or PCON

Access level: ADMIN or APPLIANCEADMIN