54CPS Installer/User Guide

Table 5.12: Server FLASH Command Parameters (Continued)

ParameterDescription

IMAGE=<host_file> Name of file on TFTP server host containing the image file.

Example

The following command updates the boot image program using the image file name c:\winnt\system32\drivers\cps10bt.img, which is located on the TFTP server host located at 192.168.1.16.

>ser fla app hostip=192.168.1.16 c:\winnt\system32\drivers\ima=cps10bt.img

Server Ping command

The Server Ping command enables or disables response to ping requests. When enabled, the CPS appliance receives and responds to all ping requests. When disabled, ping requests are received and silently discarded.

Syntax

SERVER PING [ENABLEDISABLE]

Table 5.13: Ping Command Parameter

Parameter

Description

 

 

ENABLEDISABLE

Enables or disables response to the ping requests.

Default = Enabled

 

 

 

Server PPP command

The Server PPP command enables or disables the PPP server on the serial CLI port. For more information, see Connecting to devices using PPP on page 15.

Once the PPP server has been configured with this command by specifying the required addresses and masks, those values remain in the database. Later, if you disable the PPP server and wish to reenable it with the same addresses, you don’t need to specify the address values again.

When you enable the PPP server, the serial CLI port must already be defined.

When you enter this command, you are prompted to confirm or cancel the specified changes.

Access right: SCON

Access level: APPLIANCEADMIN