Chapter 5: CPS Appliance Commands | 61 |
|
|
Syntax
SERVER SNMP TRAP DESTINATION ADDDELETE <ip_address>
Table 5.22: Server SNMP Trap Destination Command Parameters
Parameter | Description |
|
|
ADDDELETE | Defines or deletes the specified destination. |
|
|
<ip_address> | IP address of trap destination. |
|
|
The Server SSH command enables or disables SSH session access to the CPS appliance and specifies the SSH authentication method. When you enable SSH, all CPS sessions will be terminated if a CPS SSH server key must be generated. You must also have previously specified an authentication method other than None with the Server Security command.
If you enable plain text Telnet connections with a Server Security command, enabling SSH session access with the Server SSH command will add that as a valid connection method (both plain text and SSH connections will be allowed).
For more information, see Connecting to devices using SSH on page 16.
Access right: SCON
Access level: APPLIANCEADMIN
Syntax
SERVER SSH ENABLEDISABLE [AUTH=<auth>]
Table 5.23: Server SSH Command Parameters
Parameter | Description | |
|
| |
ENABLEDISABLE | Enables or disables SSH session access to the CPS appliance. | |
|
| |
| SSH authentication methods. You must enter the entire value; abbreviations are not | |
| permitted. Valid values are: | |
| PW | Password authentication. |
| KEY | Key authentication. |
AUTH=<auth> | PWKEY | Password or key authentication. |
| KEYPW | Key or password authentication. |
PW&KEY Password and key authentication.
KEY&PW Key and password authentication.
Default = PW