Avocent CPS1610, CPS810 manual 97

Appendices 83

Table C.1: CPS Appliance Enterprise Traps (Continued)

Trap	Description and Variable(s)
userAuthentication	A user failed to authenticate with the CPS appliance.
Failure	Variable: username.
	The CPS appliance has received a command to set itself to factory default values.
factoryDefaultsSet	(The appliance sends this trap after receiving the command, but before actually
	reverting to factory default values.)
portAlert	The CPS appliance detected a port alert string on a serial port.
	Variables: server name, port number and port alert string.
configurationFile	The CPS appliance has loaded a configuration file. This trap applies to
	DSView software.
Loaded
	Variables: command issued by username and name of loaded file.
userDatabaseFile	The CPS appliance has loaded a user database file. This trap applies to
	DSView software.
Loaded
	Variables: command issued by username and name of loaded file.
	The CPS appliance detected that a port’s power on/off control signal is in the state
powerOnDetected	indicating power is on. This trap is sent upon initialization if the condition is detected.
	Subsequent traps are sent only if this signal changes state.
	Variables: server name and port number.
	The CPS appliance detected that a port’s power on/off control signal is in the state
powerOffDetected	indicating power is off. This trap is sent upon initialization if the condition is detected.
	Subsequent traps are sent only if this signal changes state.
	Variables: server name and port number.
	An SPC device is online. This trap is sent upon initialization of the SPC device if it is
SPCOnline	online and responding. Subsequent traps are sent if the SPC device changes from
	offline to online.
	Variables: SPC location name and CPS appliance port number.
	An SPC device is offline. This trap is sent upon initialization of the SPC device if it is
SPCOffline	not responding. Subsequent traps are sent if the SPC device changes from online
	to offline.
	Variables: SPC location name and CPS appliance port number.
	An SPC device has a login error. This occurs when the appliance is unable to log in
SPCLoginError	to the SPC device using the username configured in the appliance.
	Variables: SPC location name, CPS appliance port number, username attempting to
	log in.
SPCSocketOn	The On command was issued to an SPC socket.
	Variables: command issued by username, server name, SPC location name, CPS
Command
	appliance port number and SPC socket number.
SpcSocketOff	The Off command was issued to an SPC socket.
	Variables: command issued by username, server name, SPC location name, CPS
Command
	appliance port number and SPC socket number.