70CPS Installer/User Guide
Table 5.35: SPC Command Parameters (Continued)
ParameterDescription
Minimum amount of time that a socket will stay on before it may be turned off. The value may be specified with S for seconds, M for minutes or H for hour. Valid values are:
ONMIN=<time> 0S, 15S, 30S, 45S, 60S, 75S, 90S, 105S. 1M, 2M, 3M, 4M, 5M, 10M, 15M, 30M, 60M.
1H.
Default = 0S
Minimum amount of time that a socket will stay off before it may be turned on. The value may be specified with S for seconds, M for minutes or H for hour. Valid values are:
OFFMIN=<time> 0S, 15S, 30S, 45S, 60S, 75S, 90S, 105S. 1M, 2M, 3M, 4M, 5M, 10M, 15M, 30M, 60M.
1H.
Default = 0S
User Commands
The User command has several forms, as listed in Table 5.36.
Table 5.36: User Command Summary
Command | Description |
|
|
User Add | Adds a new user to the user database. |
|
|
User Delete | Deletes a user from the user database. |
|
|
User Logout | Terminates a user’s active session. |
|
|
User Set | Changes a user’s configuration information. |
|
|
User Unlock | Unlocks a |
|
|
User Add command
The User Add command adds a new user to the CPS user database. The user database holds a maximum of 64 user definitions. For more information, see Managing User Accounts on page 22 and Access rights and levels on page 23.
Access right: USER
Access level: ADMIN or APPLIANCEADMIN
Syntax
USER ADD <username> [PASSWORD=<pwd>] [SSHKEY=<keyfile>] [FTPIP=<ftpadd>] [KEY=<sshkey>] [ACCESS=<access>] [PREEMPT=1234]