10EVR1500 Installer/User Guide
NOTE: You can download the J2SE Runtime Environment from the Sun Microsystems™ web site by typing http://java.sun.com/j2se/downloads.html in the web browser address bar. If you do not have the J2SE Runtime Environment installed on your PC when you fi rst connect to the EVR1500 environmental monitor appliance with a web browser, the appliance will redirect your browser to the java.sun.com web site so that you can download and install the correct J2SE Runtime Environment fi les on your PC.
CAUTION: Downloading the newest version of Java J2SE may affect other
Verification of Ethernet and sensor conditions
The LEDs on the front and back panels of the EVR1500 environmental monitor appliance show the status of the appliance and the Ethernet connection. LEDs on the front panel also indicate the status of the internal sensors. Refer to the following table for descriptions of the LEDs on the EVR1500 environmental monitor appliance.
Front Panel LEDs
LED Label | Color | Description |
PWR | Green | When illuminated, indicates the appliance |
|
| is powered. |
|
|
|
LINK | Green | When illuminated, indicates an active |
|
| connection to the network. |
|
|
|
10/100 | Amber | When illuminated, indicates communication at |
|
| the 100 Mb rate. When not illuminated, indicates |
|
| 10 Mb rate. |
|
|
|
TEMP | Green | When illuminated green, temperature is normal. |
| Red | When illuminated red, temperature is |
|
| over/under threshold. |
|
|
|
HUM | Green | When illuminated green, humidity is normal. |
| Red | When illuminated red, humidity is over/ |
|
| under threshold. |
|
|
|
A/F (Air Flow) | Green | When illuminated green, air fl ow is normal. |
| Red | When illuminated red, air fl ow is |
|
| over/under threshold. |
|
|
|
AUDIO | Green | When illuminated green, audio is normal. |
| Red | When illuminated red, audio is over/under threshold. |
|
|
|
NOTE: TEMP, HUM, A/F and AUDIO LEDs are controlled by the GUI confi guration for each specifi c sensor.