36EVR1500 Installer/User Guide

3.Click the Enabled checkbox to enable the delimited report.

4.Type a new name for the report in the Unique name field. The name cannot contain any spaces. The only special character allowed is the underscore (_).

5.Type a delimiter in the Delimiter field. Any delimiter, including colon (:), semicolon (;), comma (,), plus (+), equals (=) and minus (-), may be used.

6.Type header information for the delimited report in the Header field. The values available for inclusion in the report display in the Values table.

7.Under Selected, click the checkboxes to select sensor values you wish to include in the report.

NOTE: Click Check All or Clear All to select or deselect all sensor values for the report.

8.Click the Test Selected button to test the report. A message box displays to show the contents of the report you are testing. Click OK to exit the message box.

NOTE: Clicking the Test Selected button does not save the confi guration change.

9.Click Save to save all of the configuration changes in the Configuration tab. - or -

Click the Cancel button to revert all configuration items in the

Configuration tab to the last Save operation.

To delete a delimited report:

1.After launching the web GUI, click Configuration - Delimited Reports. The Delimited Reports window displays a list of configured delimited reports.

2.Click the row containing the delimited report you wish to delete.

3.Click the Delete button to delete the report.

4.Click the Save button to save the change.

Configuring User Reports

Using the EVR1500 environmental monitor appliance, you can generate and send user reports as email or through FTP. User reports can be configured as “free form” reports to meet your specific requirements and can be attached directly to an email. Before sending a user report through FTP, you must write the data to a file using the Report to File action. Using the User Reports feature, you also can edit, test and delete existing user reports.

To configure a user report:

1.After launching the web GUI, click Configuration - User Reports. The User Reports window displays the user reports configured in the system.