Chapter 3: Basic Operations

45

 

 

Click the Create New button to add a new combination action. A new row displays in the combination list.

The combination action information displays in the dialog box.

3.Click Enabled to enable the Combination action.

Figure 3.20: Combination Window

NOTE: An enabled combination action is available for use in the following operations:

Thresholds, Rules and Timed Rules.

4.Type a unique name for the combination action in the Unique name field. The name cannot contain any spaces. The only special character allowed is the underscore (_).

5.Select actions from the drop-down menus. If the combination action is enabled, you must select at least two actions.

NOTE: Actions 1 to 4 are lists of selectable Email, SNMP Traps, FTP, Output and Report to File actions that have been defi ned in the system. When a combination action is executed, the actions are executed in sequential order. You do not have to type an action in all four fi elds. Blank actions, indicated by dashes (-), are not processed by the system.

6.After selecting actions, click the Test Selected button to execute the combination action. A message box displays with the results of each action. Click OK to exit the message box.

7.Click the Save button to save all items in the Configuration tab. - or -