54EVR1500 Installer/User Guide
To configure a threshold:
1.After launching the web GUI, click Application - Thresholds. The Thresholds window displays thresholds configured in the system.
2.Click Create New to add a new threshold to the list. A new row is added to the thresholds table.
Click the threshold you wish to configure.
The threshold information displays in the dialog box.
3.Click the Enabled checkbox to enable the threshold. An enabled threshold is processed at the selected frequency by the system.
4.Type a new name for the threshold in the Unique name field. The name cannot contain any spaces. The only special character allowed is
the underscore (_).
5.Type a new value (in seconds) in the Frequency of testing in seconds field. The value you enter is the frequency that the system will evaluate the enabled threshold.
6.Select an input from the Value to test
7.Enter a new value in the Threshold value for action to fire field.
8.Enter a new value in the Release value for the threshold field.
NOTE: If the Trig value is greater than the Rel value, the threshold is a Trigger High Event; if the Trig value is less than the Rel value, the threshold is a Trigger Low Event.
9.Select an action from the Action to fire
NOTE: The action will execute once when the threshold has been exceeded and will wait for the release value to reset. Once the value has been reset, the action will execute again, if the threshold is exceeded.
10.After configuring the new or existing threshold, click the Test Selected button to evaluate the input, the Trig/Rel values and the state of the threshold. This command also executes the action, if the values are appropriate. A message box displays with the results of the test. Click OK to exit the message box.
11.Click the Save button to save the configuration items in the Application tab.
- or -
Click the Cancel button to revert all configuration items in the Application tab to the last Save operation.