Chapter 2: Hardware Overview 13

Receiver

The receiver decrypts, uncompresses and converts media signals back into the desired format and

outputs the signals to the connected display device. Depending upon your media module, the

display device can accept HDMI, component or VGA signals.

Power
Reset
USB
IR Blaster
Status
Omni-directional
Antenna
IR Receiver
Figure 2.3: Emerge MPX1000 HD Multipoint Extender Receiver (Front)
Serial Port RS-232, 9-pin serial port to support serial passthrough for control
of display devices
Power IEC power socket with built-in fuse and on/off switch
USB Port USB Type B; reserved for future use
Media Module Slot Open slot on rear; used for insertion of A/V media module
Table 2.2: Rear Panel (Transmitter) (Continued)
Item Description
Table 2.3: Front Panel ( Receiver)
Item Description
Unit Reset Recessed momentary button
Infrared (IR) Receiver Captures signals from an IR remote controller for broadcast
through the extension network