Appendices 57
Appendix D: Mounting OptionsTransmitter mounting
The MPX1000 transmitter ships with rack mount brackets for installation into an equipment rack.
When installed, the transmitter requires only one unit of rack height.
Figure D.1: Transmitter Rack Mount Brackets
The MPX1000T transmitter also supports the following mounting options:
• Table mounting via the optional RMK-56 mounting kit, described below
• VESA MIS-E compatible mounting, using third-party brackets as described below
Receiver mounting
The MPX1000R receiver features the following mounting options, allowing it to adapt to most
work environments:
• Table mounting via the optional RMK-56 mounting kit, described below
• VESA MIS-E compatible mounting, using third-party brackets as described below
Table mounting
The Avocent RMK-56 table mounting bracket kit is compatible with MPX1000 transmitters and
receivers. The kit contains two brackets, which are interchangeable such that either may be used as
a left or right bracket. In addition, the brackets may be attached with keyholes facing up or down.
This flexibility allows a device to be mounted in a table top or below table manner.
Detailed instructions are provided with the kit. The following diagram illustrates the basic
components of the kit.