14 MPX1000 Extender Installer/User Guide
Figure 2.4: Emerge MPX1000 HD Multipoint Extender Receiver (Rear)
Infrared (IR) Blaster The dual IR(tx) emitter connects via the 3.5mm jack
Omni-directional Antenna Used to establish the wireless link between the transmitter and
bound receivers. Avocent offers specialized antennas for
improved distance or higher performance in certain bands. See
the Avocent web site for more information
Status Lights Five colored LEDs that communicate the current state of the
device. Located on the front panel in the following order (left to
right): RED AMBER1 AMBER2 GREEN1 GREEN2
See MPX1000R Receiver LED Status on page 54 for a detailed
description of LED status indicators
USB Port USB type A; reserved for future use
Power (PWR) LED built into the unit to indicate that power is connected and
turned ON
Power
USB Media Module Slot
L1
Serial
L2
Table 2.4: Rear Panel (Receiver)
Item Description
L1 Ethernet Port RJ 45, 10/100 Ethernet for web-based management of the
MPX1000 receiver.
Table 2.3: Front Panel ( (Continued)Receiver) (Continued)
Item Description