56 MPX1000 Extender Installer/User Guide
Reset button status
You may perform multiple levels of reset using the button on the front panel of the receiver. As you
continue to hold the button the LED pattern will change, reflecting the action to be performed. The
various LED patterns are described in the following table:
Table C.3: LED Status - Reset Button Press
All LEDs blinking or
flashing together Hold time Interpretation
Rate: 2 blinks per
second .25 - 5 seconds If the reset button is released now, the MPX1000 receiver will
reset and reboot without changing any configuration parameters.
Rate: 4 flashes per
second 5 - 10 seconds If the reset button is released now, the MPX1000 receiver will
reset its login password to factory default and then it will reset
and reboot.
Rate: 10 flashes per
second >10 seconds If the reset button is released now, the MPX1000 receiver will
reset all configuration parameters to factory defaults and then it
will reset and reboot.
The same reset functions are available on the MPX1000 transmitter; however, status is provided via
the front panel display.
Flash update status
LED indicators provide the following status information during the flash update process:
Table C.4: LED Status - Flash Update
Flash update state LED Activity
In Progress Green-2 LED flashing indicates that the flash update is in progress and that it has not
failed. While this LED is flashing, one or more of the green or amber LEDs will also
either be on solid or will be blinking to indicate the progress of the flash update.
Failed Red LED flashing indicates failure of the flash update procedure. If you are unable to
identify the source of the failure, please contact technical support for assistance.