Chapter 8: Adding and Deleting Units

123

 

 

Deleting Units

When you delete a unit, it is removed from the DSView 3 software database, and all associated connections will also be deleted.

You may also choose to delete target devices that are no longer connected when you run the Resync Wizard; see Topology synchronization options in the Resync Wizard on page 132.

To delete a power device, see Power Devices on page 165.

To delete a unit:

1.In a Units View window (see Accessing Units View windows on page 106), click the checkbox next to the unit name. To delete all units on the page, click the checkbox to the left of Name at the top of the list.

2.Click Delete. You are prompted to confirm the deletion.

3.Confirm or cancel the deletion.

Automatically deleting attached units

For target devices exclusively managed by a single appliance, you may specify that the target devices are automatically deleted when the managing appliance is deleted.

To modify target device delete policy settings:

1.Click the System tab.

2.Click Global Properties in the top navigation bar. Click Units, then click Deletion in the side navigation bar.

3.If you want target devices automatically deleted, select Delete target devices that no longer have connection.

-or-

If you do not want target devices automatically deleted, select Do not delete the target devices.

Page 143
Image 143
Avocent SPC420 manual Deleting Units, Automatically deleting attached units, To delete a unit