Avocent SPC420 manual Saving the View, Displaying Video Viewer Users

270DSView 3 Software Installer/User Guide

Refresh image

Clicking the Refresh Image button in the Manual Video Adjust dialog box will completely regenerate the digitized video image.

You may also select View - Refresh from the Video Viewer menu to refresh the image.

Video test pattern

Clicking the Video Test Pattern button in the Manual Video Adjust dialog box will toggle a display of a video test pattern. Click the Video Test Pattern button again to toggle back to a normal video image.

Saving the View

The display of a Video Viewer window may be saved to a file or to the clipboard for pasting into another program.

NOTE: Saving the view is only supported on Windows clients. The Capture to File menu option and link are disabled on non-Windows clients.

To capture the Video Viewer window to a file:

1.Select File - Capture to File from the Video Viewer menu or click the Capture to File button. The Save As dialog box appears.

2.Enter a filename and choose a location to save the file.

3.Click Save.

To capture the Video Viewer window to your clipboard:

Select File - Capture to Clipboard from the Video Viewer menu or click the Capture to Clipboard button. The image data is saved to the clipboard.

Displaying Video Viewer Users

NOTE: This procedure is not available if the DSR Remote Operations software is being used.

To display current Video Viewer users:

1.Select View - Connected Users from the Video Viewer menu or click the Connected Users button. The Users Connected to <device - Video Session number> dialog box appears, containing a list of all users connected to the Video Viewer window session.

2.Click OK to close the dialog box.

To display a list of users sharing a port or channel:

Select View - List of Shared Users in the Video Viewer menu. Users in stealth mode are excluded from this display.