86DSView 3 Software Installer/User Guide

15.To register certificates:

a.To select one or more certificates, click the checkbox to the left of the server IP addresses. To select all certificates on the page, click the checkbox to the left of the IP Address heading.

b.Click Register above the IP Address list to register the certificates. The Accept SSL Certificate window will open.

c.Click Save to store the certificate values to the DSView 3 software database on the host or click Close if you do not wish to save the certificate values.

The Authentication Service Certificate Management window will open if only one certificate was selected. If more than one certificate was selected, each will appear in order in subsequent Accept SSL Certificate windows.

16.To unregister certificates:

a.To select one or more certificates, click the checkbox to the left of the server IP addresses. To unregister all certificates, click the checkbox to the left of the IP Address heading.

b.Click Unregister to unregister the certificates.

c.A confirmation message box will appear. Confirm or cancel the operation.

17.Click Close. The User Authentication Services window will open.

To change user browsing settings for the Active Directory external authentication service:

1.Click the Users tab.

2.Click Authentication Services in the top navigation bar. The User Authentication Services window will open.

3.Click the name of the AD service. The side navigation bar will change to include the name of the AD service at the top and, below the name, the information you may define.

4.From the side navigation bar, click User Browsing. The Authentication Service User Browsing

-AD window will open.

5.Click Browse Anonymously to browse users on the external Active Directory authentication server.

-or-

Click Browse with User Credentials to browse users on the external Active Directory authentication based on credentials configured on the server. If this option is selected, do the following:

a.Type the username for an Active Directory account that has browse rights in the User Name field. The log in ID must be entered in case sensitive text if the Active Directory server is set up to use Kerberos.

b.Type the password for an Active Directory account that has browse rights in the Password field.

Page 106
Image 106
Avocent SPC420 manual DSView 3 Software Installer/User Guide