Avocent SPC420 manual 261

Chapter 19: Using the Video Viewer 261

b.In the Local Cursor field, if you do not check the Inherit Default Settings checkbox, enable the radio button for the desired cursor type. Check or uncheck the Allow users to override this setting checkbox.

c.In the Single Cursor Mode menu, indicate whether the Video Viewer will start up in single cursor mode. Enable or disable the Allow users to override these settings checkbox.

d.In the Release Keystroke menu, select the keystroke that will release the Video Viewer single cursor mode. Enable or disable the Allow users to override these settings checkbox.

e.In the Avocent Mouse Sync menu, select Enable or Disable. Enabling Avocent Mouse Sync provides improved mouse tracking on the target device on supported system configurations. If Avocent Mouse Sync is enabled, it is not necessary to disable mouse acceleration on the target device. Enable or disable the Allow users to override these settings checkbox.

f.In the Avocent Mouse Sync Notification, select Display Notification or Do Not Display Notification to indicate if you want the mouse acceleration pop-up warning to display when a user launches a KVM session. Users cannot override this setting.

g.If you changed any settings, click Save.

7.To change toolbar settings (see Toolbar profile settings on page 258):

a.Click Toolbar in the side navigation bar. The Toolbar Settings window will open.

b.If this is not the default profile, the Inherit Default Settings checkbox may be enabled or disabled. When enabled, no other settings in this window may be changed.

c.In the Hide Delay field, select the number of seconds for the toolbar hide delay.

d.To add functions to be displayed in the toolbar, select one or more functions from the Available Functions column, then click Add. The selected items will move to the Enabled Functions column.

To add macros to be displayed in the toolbar, select one or more macros from the Available Macros column, then click Add. The selected items will move to the Enabled Macros column.

To remove functions or macros from display in the toolbar, select one or more items from the Enabled Functions or Enabled Macros column, then click Remove. The selected items will move to the Available Functions or Available Macros column.

e.Enable or disable the Allow users to override these settings checkbox.

f.If you changed any settings, click Save. The enabled functions will be displayed first in the toolbar, followed by the enabled macros.

8.To change video settings (see Video profile settings on page 258):

a.Click Video in the side navigation bar. The Video Settings window will open.

b.In the Color Depth field, choose the desired value. Enable or disable the Allow users to override these settings checkbox.

If users are allowed to override this setting, you may also enable or disable the Prohibit users from selecting a higher value checkbox. When enabled, users may select a higher