Acer G510 series manual To install a 5.25-inch storage device

54 3 Upgrading the system

6Insert the drive carrier with the newly-installed floppy drive into the drive bay.

7Connect the floppy drive and 4-pin power cables to the new drive.

8Observe the post-installation instructions described on page 38.

To install a 5.25-inch storage device

Note: If you are installing a new drive in an empty drive bay, skip steps 2 to 4.

1Observe the ESD precautions and pre-installation procedures described on page 37.

2Disconnect the power and IDE cables from the old drive.