Intel SC5300 LX, SC5300 BRP Replacing a Fixed Power Supply, Installing the Front Panel Board

Maintaining Your Server

4.Attach front panel cable (letter “A”) before installing the new Front Panel Board into the chassis to ensure the cable pins line up correctly. Place the new Front Panel Board in the chassis. Insert and tighten the three screws (letter “B”) removed earlier. Connect the optical switch cable (letter “C”) or, for rack-mount systems, reinstall the previously saved jumper.

A

B

C

TP00692

Figure 51. Installing the Front Panel Board

5.Replace the Bezel Assembly (see “Install Bezel Assembly” in Chapter 2 for step-by-step instructions).

6.Replace the Primary Access Cover (see “Install Primary Access Cover” in Chapter 2 for step- by-step instructions).

Replacing a Fixed Power Supply

WARNINGS

Hazardous conditions, power supply: Hazardous voltage, current, and energy levels are present inside the power supply. There are no user-serviceable parts inside it; servicing should be done by technically qualified personnel.

1.Disconnect all power cables from chassis after shutting down the server.

2.Remove the Primary Access Cover (see “Remove Primary Access Cover” in Chapter 2 for step-by-step instructions).

3.Disconnect all internal power cables from chassis components and server board.

44 Intel® Server Chassis SC5300 User Guide