Intel SC5300 LX, SC5300 BRP manual Install 3.5-inch Floppy Drive, Routing SCSI/SATA Data Cables

Setting Up the Chassis

3.Route SCSI/SATA data cables through the chassis openings located near the bottom of the drive cage. Connect data cables to the respective fixed drive and to the appropriate connector on the server board.

4/6-Drive Bay Cables

To 4-Drive Cage

Upper

Bay Cables

TP00552

To 6-Drive Cage

Figure 14. Routing SCSI/SATA Data Cables

Install 3.5-inch Floppy Drive

1.Press pair of slides inward (letter “A”) to release and pull slide/filler panel assembly out of upper device bay. Remove EMI panel from bracket (letter “B”).

A

A

B

TP00535

Figure 15. Removing Slide/Filler Panel Assembly from Upper Device Bay

2. Use a flat blade screwdriver to remove the knock-out insert from the front of tray.

18 Intel® Server Chassis SC5300 User Guide