Intel SC5300 BRP, SC5300 LX manual Replacing the Front Panel Board, Removing the Front Panel Board

Maintaining Your Server

4.Replace Primary Access Cover (see “Install Primary Access Cover” in Chapter 2 for step-by-step instructions).

Replacing the Front Panel Board

1.Remove the Primary Access Cover (see “Remove Primary Access Cover” in Chapter 2 for step-by-step instructions).

2.Remove the Bezel Assembly (see “Remove Bezel Assembly” in Chapter 2 for step-by-step instructions).

3.Disconnect the front panel cable (letter “A”) from the Front Panel Board. Disconnect the optical switch (letter “B”) if connected. If jumper is installed for a rack-mount system, remove jumper and save it. Remove and save the three screws (letter “C”) holding the front panel board to the chassis. Carefully remove the Front Panel Board.

C

A

B

TP00690

Figure 50. Removing the Front Panel Board

Intel® Server Chassis SC5300 User Guide 43