Setting Up the Chassis
Install Bezel Assembly (Pedestal Only)
✏NOTE
This step applies to a pedestal configured chassis only. For instructions on installing a bezel in a rack configuration, refer to the Rack Conversion Kit Installation Guide: Intel® Server Chassis SC5300.
C
A
D
A
B
D
40˚ Max
TP00541
Figure 45. Installing Bezel Assembly
1.Open the Outer Bezel Door of the Bezel Assembly (letter “A”) and remove filler panels that correspond to installed devices.
2.Close the Outer Bezel Door (letter “B”).
3.Fit the right edge of the Bezel Assembly against the right side of chassis and engage plastic bezel hooks (letter “C”) into raised metal slots at chassis edge.
4.Rotate Bezel Assembly toward chassis and latch the two plastic tabs (letter “D”) on left side of Bezel Assembly to chassis.
36 | Intel® Server Chassis SC5300 User Guide |
