Setting Up the Plotter
Task 2: (Optional) Install Memory Expansion Modules
700
750C Plus
Task 2: Install Memory Expansion Modules (Optional)
Your plotter comes with 5.5 MB of standard memory.
Your plotter comes with 11 MB of standard memory.
You can expand this by adding one or two memory expansion modules, in any combination. Supported sizes are 4 MB, 8 MB, 16 MB and 32 MB. So the maximum standard memory for your plotter is:
700
750C Plus
5.5+ 32 + 32 = 69.5 MB
11 + 32 + 32 = 75 MB
For HP part numbers, see page
1Make sure that the plotter is switched OFF and that neither the power cord nor an interface cable is connected.
X
X
1847