Working With Media and Cartridge(s)

Loading Media

8Push the endcap back in, making sure that the tabs are flush against the ends of the roll. Push it far enough to be firm, but do not use excessive force as this may result in broken tabs.

B

0016

9Insert the spindle so that the media stop (A) is to the right and the endcap (B) to the left. Push in firmly on both ends. Make sure the media remains flush against the media stop.

B

 

A

A

 

Media path

 

0017

The media should wind up from behind the roll.

1837

10Check the leading edge as it unwinds from the spool. If it is uneven, trim it as explained in step 11. Otherwise go to step 12.

MEDIA AND 3 CARTRIDGES

3-13

Page 91
Image 91
HP Design Jet Plotter 750C Plus, Design Jet Plotter 700 manual Media should wind up from behind the roll, Media path