Setting Up the Plotter

Task 6: (Optional) Print a Demonstration Plot

700

750C Plus

3The Receiving light flashes while the plot is being processed, and then the plotter starts printing. After it has finished:

On roll media, the plotter waits for the ink to dry, if necessary, and drops the plot into the media bin.

On sheet media, wait until the ink is dry, if necessary (see the front-panel display for an ink-drying message), and then gently pull the sheet out from the plotter. On HP Coated Paper you don't need to wait at all.

4Examine the plot, with the following questions particularly in mind: Are the lines clean and complete?

Are the area fills smooth?

Are the black and white areas correctly defined?

Is the color of good quality?

Unless you changed it, the print-quality setting on the front panel was Best. If you have any concerns about the print quality of the sample plot, use the troubleshooting advice starting on page 9-16.

1-26