Working With Media and Cartridge(s)
Loading Media
14
15
Use the ↑ and ↓ keys until the display shows the type of media you are loading1, and then press the Enter key.
SELECT MEDIA | ↑ |
| |
Coated paper | ↓ |
| Enter |
If you are using software that offers a ªspecial print modeº for this plotter, then simply press Enter on the first media type displayed (whatever it is), as in this case it is the software that controls the print mode, not the plotter. For more details on special print modes, see page
0014
aWhen the front panel instructs you, lift the media lever.
bTake hold of the edge(s) of the media, now extending from the exit slot, and pull the media toward you until taut. Then align the left and right edge(s) of the media, so that they are flush with the edge(s) of the roll.
B A
cWhen the front panel instructs you, lower the media lever.
0018
1 For advice on media types, see page