HP Design Jet Plotter 750C Plus, Design Jet Plotter 700 To Change the Graphics Language Setting

Device setup

Lang

Full menu mode Default: 7586, HP-GL/2

Reconfiguring Your Plotter

Changing the Graphics Language Setting for a Different Application

Changing the Graphics Language Setting for a Different Application

Your software application communicates with the plotter by a graphics language. The plotter supports HP industry standard CAD language

HP-GL/2 (7856)

HP-GL (7586B)

HP RTL

The plotter's default setting is designed to work successfully with most applications, and is called 7586, HP-GL/2. However, it's possible that with some older or less common applications, you may need to change this setting to HP-GL/2, as explained in the table below.

To Change the Graphics Language Setting

Graphics	Comments
Language
7586, HP-GL/2	This should work successfully for most software applications.
	With this graphics language setting another parameter is
	available: Terminator. Try changing this setting from Normal
	(the default) to Special:
	if you are using an obsolete HP 7586 (pen plotter) driver,
	and your plots are incomplete.
HP-GL/2	Try this setting:
	if you have experienced plot position problems.
	if you have experienced timing problems.
	However, if you choose this setting, you don't have access to
	the Terminator option.

7 RECONFIG.

7-7