Reconfiguring Your Plotter
To Upgrade Your Plotter with More Memory
To Upgrade Your Plotter with More Memory
700
750C Plus
Your plotter comes with 7 MB of standard memory (4 MB of main memory and 3 MB of printing memory). You can expand this up to a maximum of 71 MB of standard memory by adding one or two memory expansion modules.
Your plotter comes with 11 MB of standard memory (8 MB of main memory and 3 MB of printing memory). You can expand this up to a maximum of 75 MB of standard memory by adding one or two memory expansion modules.
For HP part numbers, see page
For installation details, see the task starting on page
There is no direct relationship between file size on your computer and memory used in the plotter to print that file. In fact, because of file compression (and general complexity) it is often impossible to estimate how much memory will be used. In general, thicker lines ( 0.5 mm), complex objects (such as polylines) and fills will all use significantly more memory.
This also means that size of the largest file you can store in the plotter's queue is not the same thing as the amount of memory installed in your plotter.