HP Design Jet Plotter 700, Design Jet Plotter 750C Plus Task 1: Check That You Have All the Items Required, Power cord, Interface cable, Print cartridge(s):, Memory expansion module, A roll of HP Coated Paper

Setting Up the Plotter

Task 1: Check That You Have All the Items Required

Task 1: Check That You Have All the Items Required

Supplied	1 You need the following items, which were supplied with the plotter.
	Power cord
	The power cord supplied with your plotter should meet the plug requirements for
	your area. However, different power cords (international options) are available. If
	necessary, contact your dealer or HP Sales and Support Office.
	A roll of HP Opaque Bond Paper (for the HP DesignJet 700)
	A roll of HP Coated Paper (for the HP DesignJet 750C Plus)
	Print cartridge(s):
700	For the HP DesignJet 700:
	± Two black
	For the HP DesignJet 750C Plus:
	± One yellow
750C Plus	± One cyan
	± One magenta
	± Two black

2Inspect the plotter itself and the above accessories. If you received any item in a damaged condition, notify the dealer or HP Sales and Support Office where you purchased the plotter, and file a claim with the carrier.

Not supplied 3 You will also need the following items, which were not supplied with the plotter.

Interface cable

For details of suitable cables, see page 11-8.

Optional 4 If you have purchased extra memory, you will need your

Memory expansion module

For details of the memory expansion modules available, see page 11-14.

1SETUP

1-5