Controlling a Plot's Overall Appearance

Printing Color Drawings in Monochrome

Affects next plot sent

 

To Switch between Color and Monochrome

 

 

 

 

 

 

 

1 Use the front-panel key shown below to toggle between color and

 

 

monochrome.

750C Plus

 

 

 

 

Color

 

 

 

 

 

 

 

 

 

 

Mono

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

If you are using one of the software drivers supplied with the plotter, you can also make this setting (or an equivalent) within the driver. In this case, the driver setting will override the front-panel setting. The front-panel setting will, however, remain available as the default value, and the front-panel light displayed will not change.

If you use the supplied AutoCAD driver, you can force a color plot to monochrome by additionally setting the current palette to something other than Software (see page 5-6).

0027

2Send the plot from your computer.

The setting also impacts the plotter's internal sample plots.

5-10