Setting Up the Plotter
Task 8: (Serial Interface Users Only) Configure the Interface
3Configure the serial interface to match your software configuration.
CONFIG A
This example changes the configuration to 19200 Baud and Even parity.
Baudrate=9600
Press Enter
BAUDRATE
9600*
Press ↑
BAUDRATE
19200
Press Enter
CONFIG A
Baudrate=19200
Press ↓
CONFIG A
parity=None(0)
Press Enter
PARITY
none(0)*
Press ↓
PARITY
Even
Press Enter
CONFIG A
Parity=Even | RS±232±C |
1SETUP
Press Previous until you return to ...
Config=Factory