Working With Media and Cartridge(s)
Unloading Media
Device setup
Drying time
All menu modes Default: Normal
IMPORTANT
You can make a global adjustment to the plotter's automatic drying times through the
Drying Time Selected | Result |
in Front Panel |
|
|
|
None* | The plotter cuts plot without delay. |
|
|
Less | Adjusted for the driest expected environmental |
| conditions. |
|
|
Normal | As described in the table on page |
|
|
More | Adjusted for the most humid expected environmental |
| conditions. |
|
|
*Not recommended if you are using roll media and leaving the plotter unattended, as the ink may smear when the plots are dropped into the media bin.
If you are operating your plotter in an extremely dry environment, select Less in the front panel menu. In an extremely humid environment, select More. For environmental specifications, see page
Adjusting drying times purely to speed up the plotter is not recommended as the quality of your plot can be impaired.
MEDIA AND 3 CARTRIDGES