Setting Up the Plotter
Task 9: Set Up Your Software
Typical Checklist of Tasks to Set Up Your Software1Identify which driver you need.
Some are supplied with this plotter, as listed in the table on page
2If necessary, install the driver on your computer, see the table on page
3Add this plotter to the device list in the software.
This list may be accessed, for example, through CONFIG / Add a Plotter (in AutoCAD), Printer setup (in Microsoft Windows applications) or Printer type (in Macintosh applications). In most cases, you don't need to add the plotter for each individual software application, but, for example, just once for all Microsoft Windows applications.
4Configure the driver.
This usually involves a series of dialog boxes where you can specify such items as default media type, print quality etc.
IMPORTANT | In most cases these settings will override any settings you make on the front panel |
| of the plotter. |