Learning How To Use the Front-Panel Display

Navigating the Menu System

Use this example to practice navigating the menu system. It assumes that you have entered the menu system from the STATUS screen and wish to change the Merge setting in Pen settings. The colored arrows on the excerpt of the Front-Panel Menus plot below correspond to the numbered instructions.

1Press the ￿ key five times to display the Pen settings option.

2Press the Enter key to select the option and move to the Pen settings second-level menu. The Palette option is displayed.

3Press the ￿ key once to display the Merge option.

4Press the Enter key to select the option and move to the Merge third-level menu. The option currently selected is displayed with a *.

5Change the displayed option by pressing the ￿ or the ￿ key.

6Press the Enter key to set Merge equal to the new displayed value. You will be returned to the Merge second-level menu.

7To exit the menu system, press the Previous key twice.

If you now re±enter the menu system and repeat steps 1 to 4, you will see the option that you selected displayed with a *.

 

￿ 1

 

 

 

 

 

 

 

 

￿

 

 

 

 

 

 

 

 

 

 

 

 

Software*

 

 

 

￿

 

 

 

 

 

 

 

 

 

Palette=³

 

Palette A

 

 

 

￿

 

 

 

 

 

 

 

 

 

Palette B

 

 

 

￿

 

 

 

￿3

Factory

 

 

 

 

 

 

 

 

 

 

 

Pen settings³

 

 

Merge=³

 

Off* 5 ￿￿

¼6

 

 

 

³

²

 

³

On

 

 

 

 

 

 

 

²

2

7

 

4

 

 

 

 

Palette A³

 

 

7

 

 

Define palette³

 

 

 

 

 

 

Palette B³

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Factory³

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Note: A ³ character in a menu option box indicates that another level of menu is available.

2-8