Intel SC5300 BRP, SC5300 LX manual Remove Bezel Assembly, Removing Bezel Assembly

Setting Up the Chassis

Remove Bezel Assembly

✏NOTE

If the chassis is on its side, move the chassis to hang over the side of a table before proceeding.

1.Release the two plastic tabs (letter “A”) on the left side of the Bezel Assembly to disengage the tabs.

2.Rotate the Bezel Assembly (letter “B”) no more than 40 degrees outward.

3.At a 40-degree angle, push the Bezel Assembly away from the chassis (letter “C”). If Bezel Assembly does not immediately disconnect from the chassis, then tap the left-hand side of the Bezel Assembly to disengage the bezel hooks on the right-hand side of the chassis.

A

C

A

TP00537

B

Figure 9. Removing Bezel Assembly

Intel® Server Chassis SC5300 User Guide 13