Acer G510 series manual Installing an expansion card, To install an expansion card

62 3 Upgrading the system

Installing an expansion card

This section explains how to install an expansion card. The onboard expansion slots support PCI (Peripheral Component Interconnect) cards.

Note: The BIOS setup automatically detects and assigns resources to the new device (applicable only to Plug-and-Play expansion cards).

To install an expansion card

Note: The illustrations used in this section show the Altos G510 server chassis.

1Observe the ESD precautions and pre-installation procedures described on page 37.

2Locate an empty expansion slot on the mainboard.

3Loosen the bracket screw on the rear panel.(1).

4Pull out the card bracket (2).

5 Remove the expansion card from its protective packaging.