Acer G510 series manual To install a Dimm, Reconfiguring the system memory

61

To install a DIMM

1Observe the ESD precautions and pre-installation procedures described on page 37.

2Locate the DIMM socket on the mainboard.

3Open the clips on the socket.

4Align then insert the DIMM into the socket (1).

5Press the holding clips inward to lock the DIMM in place (2).

DIMM must be installted in the following order: DM1. DM2, DM3 and DM4

Note: The DIMM socket is slotted to ensure proper installation. If you insert a DIMM but it does not fit easily into the socket, you may have inserted it incorrectly. Reverse the orientation of the DIMM and insert it again.

6 Observe the post-installation instructions described on page 38.

Reconfiguring the system memory

The system automatically detects the amount of memory installed. Run the BIOS setup to view the new value for total system memory and make a note of it.