Axis Communications user manual LED Indicators, Axis 206 & Axis 206M

10AXIS 206 - LED Indicators

LED Indicators

After completion of the startup and self test routines, the multi-colored Network, Status, and Power LED indicators flash as follows:

AXIS 206 & AXIS 206M

	Amber	Steady for connection to 10 Mbit/s network. Flashes for network activity.
Network	Green	Steady for connection to 100 Mbit/s network. Flashes for network activity.
	Red	Flashes rapid red, together with the Status indicator, for hardware error.
	Unlit	No connection.
	Green	Shows steady green for normal operation. Can be configured to flash green at intervals
		whenever the camera is accessed. See the online help for more information.
Status	Unlit	When configured for “no flash” on camera access.
	Amber	Shows steady amber during reset to factory default or when restoring settings.
	Red	Slow flash for failed upgrade (see Emergency Recovery Procedure, on page 40.)
		Rapid flash, together with the Network indicator, for hardware error.
Power	Green	Normal operation.
	Amber	Flashes green/amber during firmware upgrade.

AXIS 206W

Network	Blue	Steady blue when wireless module has power.
(power)
Network	Amber	Flashes for traffic on wireless network.
(traffic)
	Unlit	No network traffic.
	Green	Shows steady green for normal operation. Can be configured to flash green at intervals
		whenever the camera is accessed. See the online help for more information.
Status	Unlit	When configured for “no flash” on camera access.
	Amber	Shows steady amber during reset to factory default or when restoring settings.
	Red	Please contact Axis support at www.axis.com/techsup
Power	Green	Normal operation.
	Amber	Flashes green/amber during firmware upgrade.

Note that the Network indicators LEDs (power and traffic) for the AXIS 206W are located on the front of the wireless module. Note also that these LEDs cannot be switched off.