11AXIS 206 - Install the AXIS 206/206M
Set the IP address
The AXIS 206/206M is designed for installation on an Ethernet network. This involves assigning it an IP address, automatically (via e.g. DHCP) or manually. Several methods are available. The one to use depends on how your network is configured. If unsure of the method to use, please consult your network administrator, or see the network’s documentation.
•If you are using e.g. a home broadband router, you may find it convenient to view the router’s administration pages to discover which IP address has been assigned to your AXIS 206/206M. Please consult the router’s documentation for further information.
•If your network has an Internet connection (with no HTTP proxy) and uses a DHCP server to assign IP addresses, use the
•If your network uses automatic IP addressing (DHCP) and your computer uses the UPnPTM service, the AXIS 206/206M will automatically be detected and displayed on your screen. See page 12 for more information.
•Use AXIS IP Utility (see page 13) to discover the IP address. This can also be used to set the IP addess manually.
•Set the IP address manually with the ARP/Ping method, as described on page 14.
•The default static IP address for the AXIS 206/206M is 192.168.0.90
One-click Installation
Requirements:
|
| AXIS 206/206M (AXIS 206W via |
Computer |
| |
| wireless connection) | |
on a LAN |
| |
|
| |
|
|
|
Broadband router/modem pro- viding automatic IP addressing
Internet
The AXIS Internet Dynamic DNS Service
•The
•Please note that this procedure will send the AXIS 206’s IP address, firmware version, product type and serial number to the Axis Internet Dynamic DNS Service. No personal information is transferred.
•To remove the DNS name and unregister from the Axis Internet Dynamic DNS Service, open the Setup pages in the AXIS 206, click System Options > Network > TCP/IP, click the Settings button for the AXIS Internet Dynamic DNS Service and finally, click the Remove button.