12
AXIS 206 - Install the AXIS 206/206M
Follow these instructions:
1. When the camera is connected to the power supply and the network, wait for the
Status Indicator on the front of the camera to show a steady green.
2. Now press the Control button on the rear of the camera once. The Status indicator will
blink green while it connects to the AXIS Internet Dynamic DNS Service.
3. Wait for the Status indicator to go back to showing a steady green.
4. To complete the installation, now visit www.axiscam.net from an Internet connected
PC. This must be done within 60 minutes of pressing the Control button.
5. Follow the on-screen instructions provided by the AXIS Internet Dynamic DNS
Service. You will need your product’s serial number (see the label on the rear panel) to
complete the installation.
6. Please see page 17 for instructions on how to set the password.
UPnP™ UPnP functionality is enabled by default in the AXIS 206. If also enabled on your computer
(Windows ME or XP), the camera will automatically be detected and a new icon will be
added to “My Network Places.” Click this icon to access the camera. See page 19 for
instructions on how to set the password.
Notes:
UPnP™ is a certification mark of the UPnP™ Implementers Corporation.
•To install the UPnP service on your computer, open the Control Panel from the Start Menu and
select Add/Remove Programs. Select Add/Remove Windows Components and open the Net-
working Services section. Click Details and then select UPnP as the service to add.
•Once the AXIS 206 is accessible from your computer, it is then possible to use the One-click
installation method to provide the camera with a DNS name.