15AXIS 206 - Install the AXIS 206W
Install the AXIS 206W
Before the AXIS 206W can connect to an encrypted wireless network, the wireless settings in the camera must be configured and an IP address must be set. This is done by connecting the camera to a computer with the help of the supplied USB cable. Follow the instructions below.
Set up the wireless connection - Windows
1.Connect the power adapter to the camera. Press the power cable into the cable clip on the rear panel. This will help prevent accidental cable disconnection.
2.Connect the USB cable to your computer and then to the camera.
3.Open My Computer or Windows Explorer, and the AXIS 206W should be displayed as a new drive.
The AXIS 206W displays as a drive
4.Click on the drive
for the AXIS 206W to see the files contained in the camera.
5.Click on the file setup.exe. This starts the AXIS Setup Tool, which lets you configure the wireless settings.
6.Enter the name of the network (SSID) to connect to, and optionally enable wireless encryption. See the online help in the setup tool for more information. Note that any settings made here should match those previously made in your wireless access point.
7.Specify the type of IP address to use. See the online help for more information.
8.Click OK, close the AXIS Setup Tool and disconnect the USB cable.
Online Help
