Axis Communications 2100 manual Verifying the Installation From Your Browser, Example

AXIS 2100 User’s Guide Installing Your Camera on a Network 13

Verifying the Installation From Your Browser

Having completed the installation procedure above, you should then verify the connection between the AXIS 2100 and the network, as follows:

1.Start your browser (see note below) and enter the name or IP address of your camera:

Example!

http://172.21.1.200

The Home Page for your AXIS 2100 is now displayed:

2.Continue the setup and configure your application using the Installation Wizard or Administration Tools, as described in Configuring Your Camera, on page 38.

Important!

•To enable the updating of images in Microsoft Internet Explorer, you must set your browser to allow ActiveX controls, and perform a once-only installation of the Axis ActiveX component onto your workstation. However, if your computer environment restricts the installation of additional software, you can alternatively set your AXIS 2100 to use a Java applet for updating the images. This is done from Image - Settings.

•When accessing the Admin Tools for the first time in a browser, you will not be prompted for a user- name or password. You will be assumed to be the Administrator and will automatically be logged on as such, with the username root and the default password pass. This root password must, however, be changed as soon as possible, to enable the security function. Also, all Axis products are shipped with the same password as default. For more information, see System Security, on page 24.