AXIS 225FD - Product Features
Power connector block - for connection of a power supply. See Power connections, on page 36.
I/O terminal connector - The I/O terminal connector provides the physical interface to one solid state relay output, two digital inputs,
Network connector - The AXIS 225FD connects to the network via a standard network cable, and automatically detects the speed of the local network segment (10BaseT/100BaseTX Ethernet). This socket can also be used to power the AXIS 225FD via PoE (Power over Ethernet). The camera also negotiates the correct power level when using PoE.
Serial Number - This number is used during installation.
Control Button - This button is used during the installation using the AXIS Internet Dynamic DNS Service (see the Installation Guide) or to restore the factory default settings, as described in Advanced, on page 33.
LED Indicators
After completion of the startup and self test routines, the
| Green | Steady for connection to 100 Mbit/s network. Flashes for network activity. | |
|
|
| |
Network | Amber | Steady for connection to 10 Mbit/s network. Flashes for network activity. | |
|
| ||
Red | Flashes rapid red, together with the Status indicator, for hardware error. | ||
| |||
|
|
| |
| Unlit | No connection. | |
|
|
| |
| Green | Shows steady green if the connected power supply can deliver the correct voltage for | |
Heater |
| the heater (See Power, on page 42 of Technical Specifications). | |
|
| ||
Red | Shows steady red if the connected power supply cannot deliver the correct voltage (i.e., | ||
| |||
|
| the voltage is either too high or too low). | |
|
|
| |
| Green | Shows steady green for normal operation. Can be configured to flash green at intervals | |
|
| whenever the camera is accessed. See the online help for more information. | |
|
|
| |
Status | Amber | Shows steady amber during reset to factory default or when restoring settings. | |
|
| ||
Red | Slow flash for failed upgrade (see Emergency Recovery Procedure, on page 38). | ||
| |||
|
| Rapid flash, together with the Network indicator, for hardware error. | |
|
|
| |
| Unlit | When configured for “no flash” on camera access. | |
|
|
| |
Power | Green | Normal operation. | |
|
| ||
Amber | Flashes green/amber during firmware upgrade. | ||
| |||
|
|
|
6
