Find on Wrong, This setting pertains only to touch

THE BADGER®-RADIX®User Guide

February 2007

Find on Wrong	This setting pertains only to touch	This setting is very handy for
	meter reading. The gathered meter	touch meter reading because
	reading information contains the	it allows you to read meters
	module ID number. If the number	out of the normal reading
	is different than the ID number for	sequence. If you need to
	the current meter on the read screen	resequence the route, using
	(the meter was read out of	this setting you can read the
	sequence), the Badger-Radix will	route in the new reading
	search for the correct meter if this	sequence order with ease.
	setting is chosen. If the setting is	You can then resequence the
	not chosen, the Badger-Radix will	route using the new read
	alert you to the fact that the reading	date/times.
	indicates that the wrong meter is
	being read.
Run Consumption	Not used at this time	Not used at this time
Auto Clear	This setting is used with older	This setting is not used within
Tamper	technology radio systems.	the Badger-Radix.
Verification	When this setting is chosen, the	If you are required by state
	Badger-Radix will request a manual	law to periodically verify an
	reading for each successful reading.	interrogated meter reading
	This manual verification of the	with a visual reading, the
	interrogated reading can be used to	Badger-Radix will request
	satisfy requirements in some states.	your required visual reading
		when this setting is chosen.
Show Previous	This setting (as well as Show High	To insure accuracy of the meter
Reading	and Low) controls the amount of	readings, some utilities will
	information available to the meter	choose to clear this setting.
	reader. When this setting is chosen,	Other utilities will choose this
	the previous reading value is	setting so that if an
	displayed when the View High/Low	investigation on the operation
	button is pressed.	of the meter is needed, this
		information is available. You
		need to determine which option
		is right for you.
Hi / Low	This setting allows you to choose how	If you use the last meter
Readings Fail	the high and low limits are used in the	reading as the low limit and
	Badger-Radix. If the setting is	you wish to be alerted to
	checked, the Badger-Radix will label a	conditions of no usage, check
	reading as High if the reading is	this setting. Note that the
	greater than or equal to the high limit.	high and low limit checking
	Similarly, the reading will be labeled	is only in the Badger-Radix.
	low if the value is less than or equal to	It does not extend to Badger
	the low limit. When the setting is	CONNECT.
	unchecked, the high and low
	processing is strictly greater than the
	high limit or less than the low limit.

Find on Wrong

This setting pertains only to touch

This setting is very handy for

meter reading. The gathered meter

touch meter reading because

reading information contains the

it allows you to read meters

module ID number. If the number

out of the normal reading

is different than the ID number for

sequence. If you need to

the current meter on the read screen

resequence the route, using

(the meter was read out of

this setting you can read the

sequence), the Badger-Radix will

route in the new reading

search for the correct meter if this

sequence order with ease.

setting is chosen. If the setting is

You can then resequence the

not chosen, the Badger-Radix will

route using the new read

alert you to the fact that the reading

date/times.

indicates that the wrong meter is

being read.

Run Consumption

Not used at this time

Auto Clear

This setting is used with older

This setting is not used within

technology radio systems.

Verification

When this setting is chosen, the

If you are required by state

Badger-Radix will request a manual

law to periodically verify an

reading for each successful reading.

interrogated meter reading

This manual verification of the

with a visual reading, the

interrogated reading can be used to

Badger-Radix will request

satisfy requirements in some states.

your required visual reading

when this setting is chosen.

Show Previous

This setting (as well as Show High

To insure accuracy of the meter

Reading

and Low) controls the amount of

readings, some utilities will

choose to clear this setting.

Other utilities will choose this

the previous reading value is

setting so that if an

investigation on the operation

of the meter is needed, this

information is available. You

need to determine which option

is right for you.

Hi / Low

This setting allows you to choose how

If you use the last meter

Readings Fail

the high and low limits are used in the

reading as the low limit and

Badger-Radix. If the setting is

you wish to be alerted to

checked, the Badger-Radix will label a

conditions of no usage, check

reading as High if the reading is

this setting. Note that the

greater than or equal to the high limit.

high and low limit checking

Similarly, the reading will be labeled

is only in the Badger-Radix.

low if the value is less than or equal to

It does not extend to Badger