Badger Basket RAD-IOM-01 Show Negative, you to possible negative, consumption. The most common

THE BADGER®-RADIX®User Guide

February 2007

Show Negative	When checked, the Badger-Radix	If you wish to see these
Consumption	will compare the current reading	messages, check the box.
	with the previous reading and alert
	you to possible negative
	consumption. The most common
	cause for this condition is a meter
	that has been changed but the
	billing system has not been updated
	with the new meter information.
IR Port	Sets the port used by the software	Press the I key to set the
	for programming Badger ORION	value. In almost all cases, the
	transmitters	Built-in Center port will be
		used
ORION	Sets the port used by the software to	Press the O key to set the
	gather Badger ORION readings	value. In almost all cases, the
		Built-in port will be used
VersaProbe	Sets the port used by the software to	Press the V key to set the
	gather touch readings	value. In almost all cases, the
		Bottom Left port will be used

Entering New Accounts

The Badger-Radix can add accounts to the list of stored accounts it received from the Badger CONNECT software. But before you add a new account in the Badger-Radix, be aware that the Badger CONNECT software can display the accounts that you add but cannot permanently add them to its database. Information from accounts added in the Badger-Radix can be printed when the accounts are downloaded to Badger CONNECT, but the accounts will not be added to the Badger CONNECT database. New accounts are added to Badger CONNECT when the list of meters to read is sent from the billing system.

Note that if you need to read a few meters for testing purposes, there is no need to create a new account. Simply use the Badger-Radix Quick Read feature. See the Quick Read section of this manual for more information.

If you need to enter a new account into the Badger-Radix, press the New Account “N” button from the Read Menu.

Page 52 of 73