18 | >> |
Determine the centre position
If your television is equipped with the optional motorised stand, the STAND ADJUSTMENT menu appears on the screen. Once the centre position is determined, select your favourite positions for when the television is switched on and in standby.
When the STAND ADJUSTMENT menu appears …
> Press GO to start stand adjustment.
> If the adjustment is interrupted the text ‘ADJUSTMENT FAILED’ appears on the screen. Remove obstacles preventing the television from turning, and press GO to start adjustment again.
> Once adjustment is complete, the text ‘ADJUSTMENT OK’ appears, followed by the STAND POSITIONS menu.
> Move between the different stand positions; VIDEO, AUDIO and STANDBY by means of 
and 
and press GO to enter the menu.
> To turn the television, press 
or 
.
> Press the green button to store each of the positions.
STAND ADJUSTMENT
CENTRE POSITION
CALIBRATING . . .
Make sure that there is enough room for the tele- vision to turn to the right and left.
For further information about stand positions, refer to the chapter ‘Set positions for the tele- vision to turn to’ on page 28.
