41
The speaker and digital sockets mentioned below are only available, if your television is equipped with the optional Surround Sound module:
REAR
The two sockets are used for connecting the external rear speakers in a surround sound setup.
FRONT
The two sockets are used for connecting the external front speakers in a surround sound setup.
SUBWOOFER
Socket used for connecting a BeoLab 2 subwoofer in a surround sound setup.
A1 – A2
For digital sound input from external equipment connected to an AV socket group.
Computer connection – DVI socket
Disconnect the television, the computer, and all equipment connected to the computer from the mains.
Using the appropriate type of cable, connect one end to the DVI or VGA output socket on your computer, and the other end to the DVI socket on the television.
To hear sound from the computer in the tele- vision speakers, use the appropriate cable and connect the sound output on the computer to the L – R sockets on the television.
Reconnect the television, the computer, and all equipment connected to the computer to the mains.
DVI
DVI
DVI connection for receiving digital or analogue graphics from an external PC. Supports the following resolutions: 60 Hz; 640 × 480, 800 × 600, 848 × 480, 1024 × 576, 1024 × 768, 1280 × 720, 1360 × 768.
IMPORTANT! If you wish to connect a computer to the television and use the television as a monitor, make sure that the television, the computer, and all equipment connected to the computer are all disconnected from the mains before you connect the computer and the television to each other.
In addition, the computer must be connected to a grounded wall outlet as specified in the computer’s
If you have connected HD equipment to your television, some video functions are affected:
–The
–If you have selected FORMAT 2 for
–You cannot distribute sound or picture from a HD source to a product in a link room;
–You cannot record an HD source, unless your HD equipment also provides a Standard Definition (SD) signal;